Lexmark 16A0310 OptraImage 242/232 Setup Guide (2.5 MB) - Page 18
Set up to, receive faxes
View all Lexmark 16A0310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
During printer power up, if the MarkNet print server is configured to use Network Time Protocol (NTP) time, the current date and time are provided by the time server. However, you must set the time zone to get the correct time. 5 Enter the required FCC information: • Date and Time (current date and time) • Station Name (personal name or company name) • Station Number (fax phone line number) 6 Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required information. 7 Set or change any additional fax settings you want. 8 After you finish entering the information, click Submit. Use MarkVision to set fax information Installation instructions for installing MarkVision is in the CD booklet shipped with the Drivers, MarkVision, and Utilities CD. MarkVision is a printer management utility on the Drivers, MarkVision, and Utilities CD. After installing MarkVision, you can do an IP search to find the OptraImage printer containing the MarkNet N2501e or N2401e print server and go to the Fax tab to set the required information. Click Configure, TCP/IP, and launch the TCP/IP address manager. Follow the instructions on the screen, and then save your settings before closing MarkVision. Set up to receive faxes The available printer output bin choices are determined by what your printer supports. For information about what your printer supports, refer to your printer documentation. If you are changing fax modes, you must click Submit before you can access the configuration page. For a complete list of receive fax options, refer to the online documentation on the OptraImage CD. Click View Documentation, Use OptraImage, and search for Solve Fax Problems. You can configure OptraImage to route faxes received through the fax modem port on the MarkNet N2501e to an output bin on your printer. To set the fax receive options: 1 Type the IP address of the OptraImage in the URL field of your browser, and then press Enter. 2 Click Configuration. 3 Under the OptraImage heading, click FAX Setup. 4 Click Configuration. 5 Set your options for Fax storage, Output bin, Rings to Answer, and so on. 6 When you have finished, click Submit. 18 OptraImage Setup Guide