Lexmark 17S0026 Setup Guide - Page 23
Installing a hard disk
UPC - 734646080262
View all Lexmark 17S0026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing a hard disk Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. Follow the instructions in this section to install an optional hard disk. You need a small Phillips screwdriver to attach the hard disk to the mounting plate. If an option card has been installed, you may need to remove it before installing the hard disk. 1 Remove the system board access cover (see page 20). 2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package. 3 Align the ribbon cable connector with the connector pins on the hard disk. 4 Attach the ribbon cable to the hard disk. 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. Hard disk Mounting plate Ribbon cable 7 Press the ribbon cable connector into the connector on the system board. 8 Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. The hard disk snaps into place. What do I do now? Task Installing an option card Replacing the system board access cover Go to page... 24 25 Install memory, firmware, or option cards 23
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39