Lexmark 2590n Technical Reference - Page 34
Set Automatic Perforation Skip, Cancel Automatic Perforation Skip, Proportional Space Mode
UPC - 734646050937
View all Lexmark 2590n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Draft document 2-14 Page/Form Layout Set Automatic Perforation Skip This command specifies the number of lines to be skipped at the bottom of each page, which creates a bottom margin. Format ESC N n Decimal 27 78 n Hexadecimal 1B 4E n USAGE NOTES • This command remains in effect until: - Cancel Skip Perforation (ESC O) printer command is received. - Set Form Length in Lines (ESC C) printer command is received. - Set Form Length in Inches (ESC C 0) printer command is received. • Valid values for n are 1 through 255 (decimal), 01 through FF (hexadecimal). Cancel Automatic Perforation Skip This command cancels Set Automatic Perforation Skip (ESC N). Format ESC O Decimal 27 79 Hexadecimal 1B 4F Proportional Space Mode This command turns proportional space mode on and off. Format ESC P n Decimal 27 80 n Hexadecimal 1B 50 n USAGE NOTES • The value of n can be either of the following: - 1 (dec) 01 (hex) = ON - 0 (dec) 00 (hex) = OFF • (259x only) ON changes character pitch to the LQ proportional mode. OFF returns character pitch in LQ mode to the pitch selected before the proportional space mode was turned on.