Lexmark 34S0709 User Guide - Page 145
Too many flash options installed, 58 Too many trays attached, 80 Routine Maintenance
UPC - 734646084505
View all Lexmark 34S0709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Troubleshooting 145 58 Too many flash options installed Try one or more of the following: • Turn the printer off, and then remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. • Press to clear the message and continue printing. 58 Too many trays attached 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down. 3 Remove the additional trays. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. 80 Routine Maintenance The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a transfer roller. Contact Customer Support, and report the message. 84 PC Kit life warning The photoconductor kit is near exhaustion. Try one or more of the following: • Replace the photoconductor kit. • Press the up or down arrow button until Continue appears, and then press printing. to clear the message and continue 84 Replace PC Kit The photoconductor kit is exhausted. Install a new photoconductor kit. 88 Cartridge low The toner is low. Replace the toner cartridge, and then press the up or down arrow button until Continue appears, and then press to clear the message and continue printing.