Lexmark 364dn User's Guide - Page 85
Connecting to a PBX or ISDN system, Connecting to a distinctive ring service, Settings, Fax Settings
UPC - 734646140607
View all Lexmark 364dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
3 Connect the DSL filter cable to an active telephone wall jack. 1 3 2 Connecting to a PBX or ISDN system If you use a PBX or ISDN converter or terminal adapter, then follow these steps to connect the equipment: 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to the port designated for fax and telephone use. Notes: • Make sure the terminal adapter is set to the correct switch type for your region. • Depending on the ISDN port assignment, you may have to connect to a specific port. • When using a PBX system, make sure the call waiting tone is off. • When using a PBX system, dial the outside line prefix before dialing the fax number. • For more information on using the fax with a PBX system, see the documentation that came with your PBX system. Connecting to a distinctive ring service A distinctive ring service may be available from your telephone service provider. This service allows you to have multiple telephone numbers on one telephone line with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, follow these steps to connect the equipment: 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to an active analog telephone wall jack. 3 Change the Distinctive Rings setting to match the setting you want the printer to answer: a From the printer control panel, press . b Press the arrow buttons until Settings appears, and then press . c Press the arrow buttons until Fax Settings appears, and then press . Faxing 85