Lexmark 510n User's Reference - Page 178
Restore Held Jobs. Go, Resetting the Printer
View all Lexmark 510n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Understanding printer messages Message What this message means What you can do Queuing Jobs The printer is sending one or more held jobs to print. Wait for the message to clear. See also: Using the Print and Hold function Ready The printer is ready to receive and Send a job to print. process print jobs. Ready Hex The printer is in Hex Trace mode and is ready to receive and process print jobs. • Send a job to print. All data sent to the printer is printed in hexadecimal and character representation. Control strings are printed, not executed. • Turn the printer off and then on to exit Hex Trace mode and return to Ready status. Remove Paper Standard Bin The output bin is full. Remove the stack of media from the bin to clear the message. Res Reduced The printer is reducing the resolution of a page in the current job from 600 dots per inch (dpi) to 300 dpi to prevent a 38 Memory Full error. Res Reduced remains on the display while the job prints. Press Menu to open the Job Menu and cancel the current job. Resetting the Printer The printer is resetting to the current Wait for the message to clear. default settings. Any active print jobs are canceled. See also: Using the operator panel to change printer settings Restore Held Jobs. Go/ Someone reset the printer or turned Stop? it on, and the printer detects Print and Hold jobs stored on the hard disk. • Press Go. All Print and Hold jobs on the hard disk are restored to printer memory. • Press Return or Stop. No Print and Hold jobs are restored to printer memory. The printer returns to the Ready state. See also: Using the Print and Hold function Restoring Factory Defaults The printer is restoring the factory default printer settings. When factory default settings are restored: • All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted. • All menu settings return to the factory default setting except: - The Display Language setting in the Setup Menu. - All settings in the Parallel Menu, Serial Menu, Network Menu, and USB Menu. Wait for the message to clear. See also: Restoring factory default settings Understanding printer messages 178