Lexmark 654dn User's Guide - Page 24
Installing an Internal Solutions Port, Unpack the ISP and plastic tee.
UPC - 734646315906
View all Lexmark 654dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing an Internal Solutions Port The system board supports one optional Lexmark Internal Solutions Port (ISP). Install an ISP for additional connectivity options. Note: This task requires a flathead screwdriver. CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1 Access the system board. 2 Unpack the ISP and plastic tee. Note: Avoid touching the components on the card. 3 Locate the appropriate connector on the system board. Note: If an optional printer hard disk is currently installed, then the printer hard disk must first be removed. To remove the hard disk: Additional printer setup 24