Lexmark 782dtn IPDS Emulation User’s Guide - Page 60
The Lexmark C935, X940e MFP, and X854e MFP support a, with 2 staples
UPC - 734646144247
View all Lexmark 782dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
5.2.1.3 Lexmark C935, X940e MFP, X945e MFP, X850e MFP, X852e MFP, and X854e MFP Optional Advanced Finisher Functions The Lexmark C935, X940e MFP, X945e MFP, X850e MFP, X852e MFP, and X854e MFP support a Standard Finisher and an Advanced Finisher. Advanced finishing functions for the X850e MFP, X852e MFP, and X854e MFP are supported on base printer code LC3.BE.P339 (or greater) with IPDS code 3.01-01257 (or greater). The Advanced Finisher supports Corner staple, Dual staple (IPDS Edge stitch with 2 staples), Double Dual staple (IPDS Edge stitch with 4 staples), Center Fold (IPDS Center Fold-in), and Saddle staple (IPDS Saddle stitch-in). The printer automatically rotates the text 180 degrees for shortedge fed paper and 90 degrees for long-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled or folded sets that are hard to read. Finishing functions may not be applied to all paper sizes. Refer to your printer or finisher documentation to determine the finishing support and staple location for various paper sizes. The Printer device type must always be *IPDS. How to specify the Printer File parameters for Double Dual staple, Center Fold, and Saddle staple is shown below. Examples for Corner staple and Dual staple are in section 5.2.1.2 on page 58. 60