Lexmark 782dtn IPDS Emulation User’s Guide - Page 64
The optional Standard Finisher supports Corner staple and Dual staple IPDS Edge stitch. The printer
UPC - 734646144247
View all Lexmark 782dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
5.2.2.2 Lexmark C935, W840, X850e MFP, X852e MFP, X854e MFP, X940e MFP, and X945e MFP Optional Standard Finisher The optional Standard Finisher supports Corner staple and Dual staple (IPDS Edge stitch). The printer automatically rotates the text 180 degrees for short-edge fed paper and 90 degrees for long-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read. Refer to your printer or finisher documentation to determine the staple location for various paper sizes. See Lexmark C935, X940e MFP, X945e MFP, X850e MFP, X852e MFP, and X854e MFP Optional Advanced Finisher Functions (on page 65) for information on additional functions supported. Below are examples of job output statements that include the Form Definition to place staples in the printed output. Corner staple //OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FC0010 Dual staple //OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FE0010 Sending form definitions that specify invalid staple locations may cause an exception to be reported to the host. Drawings of staple placement for simplex form definitions FC0010 TEXT Text Text text text Text is shown with 0 degree rotation specified in IPDS job FE0010 Long-edge fed paper, leading edge FE0010 FC0010 64 TEXT Text, text. Text xxxxx Text is shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge