Lexmark 852e Menus and Messages Guide - Page 55
Enables Error Correction Mode for fax, Allow Save
![]() |
UPC - 734646019118
View all Lexmark 852e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Settings Menu item Purpose Values and descriptions Dial Prefix A numeric entry field is provided to enter numbers. The previously entered numbers are shown. The dial prefix could be a country code or a code businesses use to dial an outside line. Number string The entry field is limited to 16 characters. Text entry characters are limited to: 0-9 and a space. Automatic Redial Specifies the number of times the MFP automatically tries to send the fax job again by resubmitting the Fax To number. 0-9 (5*) Redial Frequency Select a range in minutes for the 1-200 (3*) number of redials to occur in that time span. Behind a PABX Enables or disables switchboard blind Yes dialing without a dial tone. No* Do not wait for a dial tone. Wait for a dial tone. Enable ECM Enables Error Correction Mode for fax Yes* jobs, which makes faxing more reliable. No ECM is enabled. ECM is disabled. Enable Fax Scans Allows sending faxes by scanning at On* the MFP. Off Fax scans are enabled. Fax scans are disabled. Driver to Fax Allows driver to fax jobs to be sent by On* the MFP. Off Driver to fax jobs can be sent. Driver to fax jobs cannot be sent. Driver to fax jobs are treated like PostScript jobs. Allow Save as Allows for saving fax numbers as Shortcut shortcuts in the MFP. Yes* A Save as Shortcut button appears on the screen. No A Save as Shortcut button does not appear on the Fax Destination screen. Dial Mode Specifies the dialing sound, either as a tone or a pulse. Note: This menu item may not be available in all countries or regions. Tone* Pulse A tone sounds for each number dialed. A pulsating noise sounds for each number dialed. Custom Job scanning Allows for scanning of custom fax jobs. On This is also known as Job Build. Off* Custom Job is not supported on all models. To set to On, select the check box. To set to Off, clear the check box. Background Adjusts the amount of background Removal visible on a copy. -4 to +4 (0*) -4 sets Background Removal to off. +4 sets Background Removal to the maximum allowed. Contrast Specifies the contrast used for the 0-5 scan job. The default is dependent on the Content menu item. If the Content menu item is reset from the default setting, then the default for Contrast is reset also. Text default is 5. The default is 0 for items other than text. 55
![](/manual_guide/products/lexmark-854e-menus-messages-guide-27f848f/55.png)