Lexmark B2338 Users Guide PDF - Page 130
Sleep Mode, Hibernate Mode, Description, Power consumption Watts
View all Lexmark B2338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Notices 130 Mode Printing Description The product is generating hard‑copy output from electronic inputs. Copy Scan Ready The product is generating hard‑copy output from hard‑copy original documents. The product is scanning hard‑copy documents. The product is waiting for a print job. Sleep Mode The product is in a high‑level energy‑saving mode. Hibernate Off The product is in a low‑level energy‑saving mode. The product is plugged into an electrical outlet, but the power switch is turned off. Power consumption (Watts) One-sided: 520 (MS321, B2338), 570 (MS421, M1242, B2442); Two-sided: 315 (MS321, B2338), 345 (MS421, M1242, B2442) N/A N/A 7 (MS321, B2338), 7.5 (MS421, M1242, B2442) 1.8 (MS321, B2338), 1.6 (MS421, M1242, B2442) 0.1 0.1 The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be substantially higher than the average. Values are subject to change. See www.lexmark.com for current values. Sleep Mode This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged after this product is not used for a specified period of time, called the Sleep Mode Timeout. Factory default Sleep Mode Timeout for this product (in minutes): 15 By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes. Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more energy. Hibernate Mode This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in Hibernate Mode, all other systems and devices are powered down safely. The Hibernate mode can be entered in any of the following methods: • Using the Hibernate Timeout • Using the Schedule Power modes Factory default Hibernate Timeout for this product in all countries or regions 3 days The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified between one hour and one month.