Lexmark C544N User's Guide - Page 116
Administrative support, Restoring the factory default settings, Using the Embedded Web Server
UPC - 734646091343
View all Lexmark C544N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Administrative support Restoring the factory default settings Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often referred to as the factory default settings. If you want to retain a list of the current menu settings for reference, then print a menu settings page before you restore the factory default settings. Warning-Potential Damage: Restoring factory default settings returns most printer settings to the original factory default setting. All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets. 1 Make sure the printer is on and Ready appears. 2 From the printer control panel, press . 3 Press the arrow buttons until Settings appears, and then press . 4 Press the arrow buttons until General Settings appears, and then press . 5 Press the arrow buttons until Factory Defaults appears, and then press . 6 Press the arrow buttons until Restore Now appears, and then press . Submitting changes appears briefly. 7 Press , and then press until Ready appears. Using the Embedded Web Server If the printer is installed on a network, the Embedded Web Server is available for a range of functions: • Configuring printer settings • Checking the status of the printer supplies • Configuring network settings • Viewing reports • Restoring the factory default settings • Viewing the virtual display • Setting Web page password protect • Setting Panel PIN protect • Setting the date and time To access the Embedded Web Server: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click one of the tabs to access information about the printer, change settings, or view a report. Note: If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh to access printer menus. Administrative support 116