Lexmark C544N User's Guide - Page 73
Universal Setup menu, Reports, Menu Settings menu
UPC - 734646091343
View all Lexmark C544N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Universal Setup menu Menu item Units of Measure Inches Millimeters Portrait Width 3-14.17 inches 76-360 mm Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Description Identifies the units of measure Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Sets the portrait width Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Sets the portrait height Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Specifies the feed direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray. Reports Menu Settings Page menu Menu item Menu Settings Page Description Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information Note: The page prints when this item is selected. Understanding printer menus 73