Lexmark C750 Service Manual - Page 297
Lexmark C750 Manual
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
5060-00x 12. Install a new cable tie in the same location as the one that was previously removed (B), if necessary. A 13. 14. 15. 16. 17. Install the MPF tray assembly and replace the screw to reconnect the MPF assembly door hinge restraint. Install the ITU and print cartridges. Reconnect power to the printer. Run the print test to check for correct operation before replacing the right rear cover. Replace the right rear cover. Second transfer roll removal See "Second transfer roll" on page 7-14 for the part number. 1. Remove the ITU assembly. See "ITU assembly removal" on page 4-37. 2. Lift the transfer roll from the front bearing and remove the transfer roll. Repair information 4-79
Repair information
4-79
5060-00
x
12.
Install a new cable tie in the same location as the one that was previously removed (B), if necessary.
13.
Install the MPF tray assembly and replace the screw to reconnect the MPF assembly door hinge restraint.
14.
Install the ITU and print cartridges.
15.
Reconnect power to the printer.
16.
Run the print test to check for correct operation before replacing the right rear cover.
17.
Replace the right rear cover.
Second transfer roll removal
See
“Second transfer roll” on page 7-14
for the part number.
1.
Remove the ITU assembly. See
“ITU assembly removal” on page 4-37
.
2.
Lift the transfer roll from the front bearing and remove the transfer roll.
A