Lexmark C750 Service Manual - Page 38
Lexmark C750 Manual
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5060-00x Symptom Print quality: toner on the back of the page Print quality: toner smears or rubs off the page Print quality: multiple horizontal lines Fuser problem: fuser cold Fuser problem: fuser running too hot Fuser problem: excessive fuser drive motor assembly noise Close Door displays constantly, unable to clear the message, POR incomplete Action Go to "Toner is on the back of the printed page" on page 2-146. Go to "Toner smears or rubs off the page with no error code displayed" on page 2-145. Go to "Horizontal lines or streaks" on page 2-137. Go to "Cold fuser service" on page 2-127. Go to "Hot fuser service" on page 2-127. Go to "Excessive fuser drive motor assembly noise" on page 2-127. Go to "Close door/HVPS/printhead interlock switch service check" on page 2-118. Symptom table-500-sheet drawer option Symptom Printer fails to recognize the option is installed The tray x autocompensator fails to retract, stays in down position Paper Low message appears when adequate paper is installed (tray x) Paper Out message appears when adequate paper is installed (tray x) Tray x does not detect size media is installed Paper Jam 24x displayed. Media fails to feed from the 500-sheet option tray Action Go to "The base printer does not recognize that tray x is installed." on page 2-108. Go to "Tray x autocompensator fails to retract, stays in down position." on page 2-109. Go to "The printer does not detect paper low in Tray x when adequate paper is installed in the tray." on page 2-109. Go to "The printer does not detect paper out in tray x when adequate paper is installed in the tray." on page 2-110. Go to "Tray x does not detect size media is installed" on page 2-111. Go to "500-sheet drawer option (242, 243, 244)" on page 2-77. Symptom table-HCIT 2000-sheet option Symptom Printer fails to recognize the option is installed HCIT does not function. There is no response. The HCIT is inoperative. HCIT does not recognize the correct paper size Paper Jam 24x displayed. Media fails to feed from the 2000-sheet option. Action Go to "Printer does not recognize that the HCIT 2000-sheet option is installed." on page 2-128. Go to "HCIT inoperative" on page 2-130. Go to "HCIT 2000-sheet Option does not recognize the size paper selected." on page 2-131. Go to "2000-Sheet high-capacity input tray (HCIT) (243, 244)" on page 2-79. 2-4 Service Manual