Lexmark C920 Service Manual - Page 72
Attendance messages, Message, Meaning, Action, All Photo Dev Life Warning
View all Lexmark C920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
5056-XXX Attendance messages Note: For more information on clearing paper jams, refer to "Clearing paper jams" on page 3-34. Message Activating Menu Changes All Photo Dev Life Warning Full Black Photo Dev Life Warning Busy Calibrating Cancel not available Cancelling Change Change Change Change Check tray connection Clearing job accounting statistics Close front door Close side door Close door Check finisher installation Meaning Action The printer is activating changes Wait for the message to clear. made to the printer settings. All photodevelopers are nearing -Select Continue to clear the the end of life and need replacing. message and print without replacing the photodevelopers. -Replace all photodevelopers. The specified bin is full. The black photodeveloper is nearing the end of life. Remove the stack of paper from the specified bin to clear the message. - Select Continue to clear the message and print without replacing the black photodeveloper. - Replace the black photodeveloper. The printer is busy receiving or processing print data. The printer is calibrating. Wait for the message to clear, or cancel the print job. Wait for the message to clear. Wait for the message to clear. The printer is processing a request to cancel a job. The printer is requesting a different type or size of paper. Wait for the message to clear. - Select Continue if you have changed the media. - Select Use current to print on media currently in the printer. - Cancel the current job. The printer cannot sense the presence of a tray. The printer is deleting all job statistics stored on the hard disk. The printer's front door is open. The printers side door is open. A door on the finisher is open. Turn the printer off and back on. If the error recurs, turn the printer off, remove the specified tray, then reattach the tray. If the error recurs, turn the printer off, remove the specified device, and call for service. Select Continue to clear the message and print without using the device. Wait for the message to clear. Close the front door to clear the message. Close the side door to clear the message. Close the finisher door to clear the message. Close tray top cover Low The hi-cap feeder door is open. The specified toner cartridge is low. Close the specified top cover to clear the message. -Select Continue to print without replacing the toner cartridge. -Replace the specified toner cartridge. 2-30 Service Manual