Lexmark C920 Service Manual - Page 73

5056-XXX Message Color Photo Dev Life Warning Copies Meaning The color photodevelopers are nearing the end of life. Action -Select Continue to continue printing without replacing the color photodevelopers. -Replace the color photodevelopers. Enter the desired number of copies. Defragmenting Flash DO NOT POWER OFF Delete Delete all Delete all confidential jobs Deleting Disabling DLEs Disabling Menus Disk corrupted Disk Recovery x/5 yyy% Empty box M Enabling Menus Encrypting Disk yyy% DO NOT POWER OFF Engine Warming The printer is defragmenting its flash memory. Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Delete a print job in the printer's -Select Continue to delete the queue. specified job. -Press Stop to cancel the operation. Delete all print jobs in the printer's -Select Continue to delete all held queue. jobs. -Press Stop to cancel the operation. Delete all confidential jobs in the -Select Continue to delete all printer's queue. confidential jobs. -Press Stop to cancel the operation. The printer is deleting print jobs. Wait for the message to clear. Wait for the message to clear. The printer is responding to a request to disable the menus. Wait for the message to clear. Note: While the menus are disabled, you cannot change the printer settings from the operator panel. The printer has attempted a disk recovery process, and cannot repair the disk. -Select Continue to reformat the disk and delete all files currently stored on the disk. -Select Do not reformat to clear the message without reformatting the disk. The printer is attempting to recover the hard disk. Disk recovery takes place in five phases; the operator panel displays the percent complete of the current phase. Do not turn the printer off while this message is displayed. Wait for the message to clear. The hole punch box on the finisher is full. The printer is responding to a request to make the menus available to users. The printer is encrypting the hard disk. The percent complete is displayed. The printer is warming the fuser assembly. Empty the hole punch box, and if necessary, reset the hole punch counter. Select Continue to clear the message and print without using the hole punch feature. Wait for the message to clear. Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Wait for the message to clear. Diagnostic information 2-31