Lexmark C9235 User Guide - Page 129
controller board., Reattach the shield, and then reattach the access cover.
View all Lexmark C9235 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Upgrading and migrating 129 5 Remove the controller board shield. 6 Unpack the optional card. Warning-Potential Damage: Avoid touching the connection points along the edge of the card. 7 Push the card firmly into place. Note: The entire length of the connector on the card must touch and be flush against the controller board. Warning-Potential Damage: Improper installation of the card may cause damage to the card and the controller board. 8 Reattach the shield, and then reattach the access cover.
5
Remove the controller board shield.
6
Unpack the optional card.
Warning—Potential Damage:
Avoid touching the connection points along the edge of the card.
7
Push the card firmly into place.
Note:
The entire length of the connector on the card must touch and be flush against the controller
board.
Warning—Potential Damage:
Improper installation of the card may cause damage to the card and the
controller board.
8
Reattach the shield, and then reattach the access cover.
Upgrading and migrating
129