Lexmark CS310 Card Stock & Label Guide - Page 14
Maintenance procedures, Troubleshooting - cartridge
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
General information 14 For the following printers, make sure perforations fall outside the 0.12-0.91‑inch area on the leading edge of the media: MS710, MS711, MS810, MS811, MS812, MX710, MX711, MX810, MX811, and MX812. 0.12 in. Pick Roller Location 0.91 in. 0.56 in. 1.08 in. 2.76 in. 3.28 in. Direction of Feed Maintenance procedures Note: These procedures apply only to mono laser printers. If print quality begins to degrade when printing on vinyl labels, then do the following: 1 Print on five sheets of paper. 2 Wait approximately five seconds. 3 Print on five more sheets of paper. To maintain printer feeding reliability, repeat this cleaning process every time you replace the toner cartridge. Note: Failure to follow maintenance procedures for your printer could cause jams, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions to some common card stock and label problems. For more troubleshooting information, see your printer documentation.