Lexmark CS310 Card Stock & Label Guide - Page 15
Problem, Solution, Change the Paper Type to Plain Paper.
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
General information 15 Problem Print on heavy stock is blurred or out of focus. Toner rubs off the page. Printing shows voids. Solution Make sure the Paper Type setting is correct for your print material. Note: Card stock in excess of 203 g/m2 (54‑lb bond) may not produce acceptable print results. Print on five sheets of paper, wait for approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated. Make sure the Paper Type setting is correct for your print material. Use material that is lighter than 300 g/m2. Print on five sheets of paper, wait for approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated. Change the Paper Type to Plain Paper. Print on five sheets of paper, wait for approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated.