Lexmark CS622 Users Guide PDF - Page 163
Installing a printer hard disk, CAUTION-POTENTIAL INJURY, CAUTION-SHOCK HAZARD
View all Lexmark CS622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Upgrading and migrating 163 4 Attach the access cover. 5 Connect the power cord to the printer, and then to the electrical outlet. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near and easily accessible. 6 Turn on the printer. Installing a printer hard disk CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Using a flat‑head screwdriver, remove the controller board access cover. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board components or connectors.