Lexmark CS622 Users Guide PDF - Page 65
Paper, Tray Configuration, Universal Setup
View all Lexmark CS622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Understanding the printer menus 65 Paper Tray Configuration Menu item Description Default Source Tray [x] (1*) Multipurpose Feeder Manual Paper Manual Envelope Set the paper source for all print jobs. Note: The multipurpose feeder is available only in some printer models. Paper Size/Type Tray [x] Multipurpose Feeder Manual Paper Manual Envelope Specify the paper size or paper type loaded in each paper source. Note: The multipurpose feeder is available only in some printer models. Substitute Size Off Statement/A5 Letter/A4 All Listed* Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes: • Off prompts the user to load the required paper size. • Statement/A5 prints an A5‑size document on statement when loading statement, and statement‑size jobs on A5 paper size when loading A5. • Letter/A4 prints an A4‑size document on letter when loading letter, and letter‑size jobs on A4 paper size when loading A4. • All Listed substitutes Letter/A4. Note: An asterisk (*) next to a value indicates the factory default setting. Media Configuration Universal Setup Menu item Description Units of Measure Inches Millimeters Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3-14.17 inches (8.50*) 76-359.91 mm (216*) Set the portrait width of the universal paper. Portrait Height 3-14.17 inches (14*) 76-359.91 mm (356*) Set the portrait height of the universal paper. Note: An asterisk (*) next to a value indicates the factory default setting.