Lexmark CS728 Users Guide PDF - Page 55
Replacing the separator pad
View all Lexmark CS728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Maintaining the printer 55 3 Remove the pick roller. 4 Unpack the new pick roller. 5 Insert the new pick roller until it clicks into place. 6 Close the multipurpose feeder. 7 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. Replacing the separator pad 1 Pull out the tray.
3
Remove the pick roller.
4
Unpack the new pick roller.
5
Insert the new pick roller until it
clicks
into place.
6
Close the multipurpose feeder.
7
Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY:
To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
Replacing the separator pad
1
Pull out the tray.
Maintaining the printer
55