Lexmark CX923 Forms and Bar Code Card P4.2 Users Guide - Page 15

Creating and managing forms 15 - When formsmerge is active on a local port, a job times out when triggered by the Local Port Timeout or the Printer Timeout-whichever is shorter. This activity terminates the current job as if an "End of Form" character has been reached. Copy Formsets settings Note: Make sure that a formsmerge directory (case sensitive) exists in the flash drive. • Copy Replace Duplicates-Copy and replace existing formats of the same name from a flash drive. • Copy Do Not Replace-Cannot copy formsets with duplicate names from a flash drive. Miscellaneous settings • Print All Forms-Print all formset information found on Forms and Bar Code Card. Notes: - If a .ppf file exists for the formset, then the paper tray and output bin information is read from the .ppf file and listed under the .ppf file name. - If both a printer hard disk and a flash memory are installed, then both total size and available size for the flash memory are shown. Only the forms on the user flash are accessible. • Error Page Print-Print an error page when Forms and Bar Code Card encounters an error. Bar code menu The bar code menu is also available on the Embedded Web Server. • Alt ESC Code-A bar code function that allows the use of an alternate escape character when processing PCL escape sequences. - On-Uses an alternate escape code character in addition to the default escape code character. - Off-Uses the default escape code character. • ESC Character-When Alt ESC Code is set to On, the value defined in this setting is used in addition to the default escape character. - 126 (~) - 34 (") - 35 (#) - 36 ($) - 47 (/) - 63 (?) - 92 (\) - 123 ({) - 124 (|) - 125 (}) Storing forms on the printer To store forms on the printer, an optional flash memory or printer hard disk must be installed. When it is installed, use Forms Manager to interact with the optional flash memory or printer hard disk.