Lexmark CX924 Menus Guide - Page 19
App Configuration, Notes, Enable the Lexmark Embedded Solutions LES applications.
View all Lexmark CX924 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Device 19 Menu item Description App Configuration LES Applications Off On* Enable the Lexmark Embedded Solutions (LES) applications. Notes: • This menu item is available only in some printer models. • When set to On, this setting does not affect built‑in applications. Scanner Configuration Scanner Manual Registration Print Quick Test Print a Quick Test target page. Note: Make sure that the margin spacing on the target page is uniform all the way around the target. If it is not, then the printer margins may need to be reset. Scanner Configuration Scanner Manual Registration Front ADF Registration Rear ADF Registration Flatbed Registration Manually register the flatbed and ADF after replacing the ADF, scanner glass, or controller board. Scanner Configuration Edge Erase Flatbed Edge Erase 0-6 (3*) ADF Edge Erase 0-6 (3*) Set the size, in millimeters, of the no‑print area around an ADF or flatbed scan job. Scanner Configuration ADF Deskew ADF Mechanical Deskew Off On Auto* Set the printer to perform ADF mechanical skew adjustment. Scanner Configuration Disabled Scanner Enabled* Disabled ADF Disabled Disable the scanner when it is not working properly. Scanner Configuration Tiff Byte Order CPU Endianness* Little Endian Big Endian Set the byte order of a TIFF‑formatted scan output. Scanner Configuration Exact Tiff Rows Per Strip On* Off Set the RowsPerStrip tag value of a TIFF‑formatted scan output. Note: An asterisk (*) next to a value indicates the factory default setting.