Lexmark CX931 Users Guide - Page 238
Paper Source, Collate, Sides, Staple, Hole Punch, Offset s, Notes, Flip Style
![]() |
View all Lexmark CX931 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Use printer menus 238 Menu item Description Paper Source Tray [x] (1*) Multipurpose Feeder Manual Paper Manual Envelope Set the paper source for the print job. Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3)* Keep the pages of a print job stacked in sequence, particularly when printing multiple copies of the job. Sides 1‑Sided* 2‑Sided Specify whether to print on one side or both sides of the paper. Staple Specify the staple position for all print jobs. Off* 1 staple, top left corner Note: This menu item appears only when a staple finisher is installed. 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right 4 staples Hole Punch Off* 2 holes 3 holes 4 holes Set the punch mode for all print jobs. Note: This menu item appears only when a staple, hole punch finisher is installed. Offset Pages None* Between Copies Between Jobs Offset the output of each print job or each copy of a print job. Notes: • Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages is offset, such as all pages designated as 1 and all pages designated as 2. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. Flip Style Long Edge* Short Edge Determine which side of the paper is bound when performing two‑sided printing. Note: An asterisk (*) next to a value indicates the factory default setting.
![](/manual_guide/products/lexmark-cx930-users-guide-bb07471/238.png)