Lexmark CX942 Printer Languages and Interfaces Technical Reference - Page 20
PCL emulation commands by function user, defined symbol set, Select Primary and Secondary Pitch
View all Lexmark CX942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Printer Control Language (PCL) emulation 20 Command / Parameters ESC&d@ ESC&t#P 0, 1-1 byte characters 21-1 or 2 byte characters 31-1 or 2 byte characters 38-1 or 2 byte characters 1008-1, 2, or 3 byte characters (UTF-8) ESC&k#S 0-10.00 cpi 2-16.66 cpi 4-12.00 cpi Function / Result Underline - Disable Text Parsing Method Communicates to the PCL parser whether character codes are interpreted as 1- or 2byte character codes. Select Primary and Secondary Pitch Selects the pitch for the primary and secondary font. PCL emulation commands by function (user‑defined symbol set) Command / Parameters Function / Result ESC*c#R Symbol Set ID Code Where: Sets the symbol set identification for the symbol set # = symbol set ID (0-32767). 0 is the factory default value. downloaded. ESC(f#W[data] Where: # = number of data bytes. Define Symbol Set Contains data for the user-defined symbol sets. ESC*c#S 0-Delete all (temporary and permanent) 1-Delete all temporary 2-Delete current (ID) 4-Make current temporary 5-Make current permanent Symbol Set Control Manages user-defined symbol sets. PCL emulation commands by function (font creation) Command / Parameters Function / Result ESC*c#D Set Font ID Where: Sets the identification number for the font being # = font ID number (0-32767). 0 is the factory default value. downloaded. ESC)s#W[data] Where: # = number of data bytes. Load Font Header Downloads soft font header information. Note: Set Font ID before using this command.