Lexmark E250D User's Guide - Page 72

Adding a memory card

Get Lexmark E250D - E B/W Laser Printer PDF manuals and user guides View all Lexmark E250D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Adding a memory card Adding a memory card The system board has one connector for an optional memory card. The printer can support up to 64MB of additional memory (for a total of 96MB). CAUTION: If you are installing a memory card after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing. Memory options designed for other Lexmark printers may not work with your printer. 1 Access the system board (see Accessing the system board on page69 ). 2 Push open the latches on both ends of the memory connector. 3 Unpack the memory card. Warning: Memory is easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch a memory card. Avoid touching the connection points along the edge of the card. 4 Align the notches on the bottom of the card with the notches on the connector. 5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. Some force may be required to fully seat the card. 6 Make sure each latch fits over the notch on each end of the card. 7 Close the side door. 8 Close the rear exit. 9 Close the front door. 10 See Recognizing installed options on page73 . 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
72
Adding a memory card
Adding a memory card
The system board has one connector for an optional memory card. The printer can support up to 64MB of additional
memory (for a total of 96MB).
Memory options designed for other Lexmark printers may not work with your printer.
1
Access the system board (see
Accessing the system board on page69
).
2
Push open the latches on both ends of the memory
connector.
3
Unpack the memory card.
Warning:
Memory is easily damaged by static electricity.
Touch something metal, such as the printer
frame, before you touch a memory card.
Avoid touching the connection points along the edge of the
card.
4
Align the notches on the bottom of the card with the notches
on the connector.
5
Push the memory card firmly into the connector until the
latches on either end of the connector
snap
into place.
Some force may be required to fully seat the card.
6
Make sure each latch fits over the notch on each end of the
card.
7
Close the side door.
8
Close the rear exit.
9
Close the front door.
10
See
Recognizing installed options on page73
.
CAUTION:
If you are installing a memory card after setting up the printer, turn the printer off,
and unplug the power cord from the wall outlet before continuing.