Lexmark E323 User's Reference - Page 78
Installing the new print cartridge, in the printer.
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing the new print cartridge 1 Take the new print cartridge out of the bag. 2 Pull off the plastic piece attached to the ends of the print cartridge and remove the foam protective liner. Note: If you recycle the old print cartridge, wrap the used cartridge with the protective foam liner and place the used cartridge in the bag. Follow the instructions inside the new print cartridge box to send the used cartridge back to us. Note: Do not touch the photoconductor drum on the bottom of the print cartridge. 3 Shake the cartridge to distribute the toner evenly. 4 Insert the print cartridge. a Align the colored arrows on either side of the print cartridge with the corresponding arrows in the printer. b Holding the handle, tilt the cartridge down and guide it between the print cartridge grooves. CAUTION: Avoid touching the fuser; it may be hot! Fuser c Push down on the cartridge until it is firmly in place. 78