Lexmark E450DN Menus and Messages - Page 24
Network/Ports, Using printer menus, TCP/IP, Standard Network
View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Using printer menus Network/Ports TCP/IP This menu section is used to view and change the Transmission Control Protocol/Internet Protocol settings. Note: This menu is not displayed for non-network models. Menu selection TCP/IP Purpose Sets the network option to TCP/IP (Transmission Control Protocol/ Internet Protocol) Values Activate View Hostname Address Netmask Gateway Enable DHCP Enable RARP Enable BOOTP AutoIP Enable FTP/TFTP HTTP Server Enabled WINS Server Address DNS Server Address On* Off View only 4 field IP address On* Off 4 field IP address Standard Network Use this menu selection to change printer settings affecting jobs sent to the printer through a network port (Standard Network). Menu selection PCL SmartSwitch Purpose Values Configures the printer so it automatically On* switches to PCL emulation when a print job received through the network port requires it, regardless of the default printer language Off Printer examines data on the network interface and selects PCL emulation if the data indicates that is the required printer language. Printer does not examine the incoming data. The printer uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. 24