Lexmark E450DN Menus and Messages - Page 29

Understanding printer messages Message Action Invalid Engine Code Download valid engine code to the printer. Note: You can download engine code while this message is displayed. Load manual feeder with • Load the specified paper in the manual feed tray or multipurpose feeder. • To ignore the manual feed request and print on paper already installed in one of the input sources, press until Continue appears, and then press . Load manual feeder with If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size, it Load manual feeder with prints on whatever paper is installed in the default input source. • Cancel the current job. Load manual feeder with Load with Load with • Load the input source with the correct type and size media. • Cancel the current job. Load Load Maintenance Replace the maintenance items and, if necessary, reset the printer maintenance counter. Menus are Disabled The printer menus are disabled. You cannot change the printer settings from the operator panel. Note: You can still cancel a job, print a confidential job, or print a held job. Contact your system support person. Network A network interface is the active communication link. Network , A network interface is the active communication link, where represents the active communication link, and represents the channel. No held jobs Wait for the message to clear. No jobs to cancel Wait for the message to clear. Parallel A parallel interface is the active communication link. Power Saver • Send a job to print. • Press to warm the printer to normal operating temperature and display the Ready message. Printing Wait for the message to clear. Printer busy Continue Quit • To read the information from the USB drive, press and then press . • To cancel the information retrieval process, press then press . until Continue appears, until Quit appears, and Programming System Code Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear and the printer to reset. Programming Flash Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Ready Send a job to print. Remote Management Active DO NOT POWER OFF The printer settings are being configured, and the printer was taken offline to ensure it is not currently printing and processing jobs. Wait for the message to clear. Remove paper from std bin Remove the paper from the standard bin. Resetting the Printer Wait for the message to clear. 29