Lexmark E460DW Media guide - Page 3

Media guide Page 3 of 4 Paper size Dimensions Standard 250-sheet tray (Tray 1) Standard or optional 250-sheet tray (Tray 2) Optional 550-sheet tray (Tray 2) Multipurpose feeder Duplex path Other Envelope 216 x 356 mm X X X X (8.5 x 14 in.) 1 A6 is supported only for grain long papers. 2 This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the software application. 3 If a paper size you want to use is not listed, configure a Universal paper size. For more information, see "Configuring Universal paper settings" on page 3. Paper capacities The capacities of the trays and the multipurpose feeder are based on 75 g/m2 (20 lb) paper. Load up to Tray 1 250 sheets of paper 150 sheets of A6-size paper 50 paper labels 50 transparencies Tray 2 250 or 550 sheets of paper 50 paper labels Multipurpose feeder 50 sheets of paper 15 paper labels 10 transparencies 10 sheets of card stock 7 envelopes Notes Vinyl, pharmacy, or dual-sided labels are not supported. Use paper labels only. Only two drawers may be installed on the printer at a time. The maximum amount of paper that can be loaded depends on whether you have a 250- or 550-sheet tray. Note: Depending on your model, Tray 2 may be an optional 250- or 550-sheet tray.. Feed paper into the multipurpose feeder only to the point where its leading edge can contact the paper guides. Do not force the paper into the feeder. Configuring Universal paper settings The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper: • Units of measure (inches or millimeters) • Portrait Height and Portrait Width • Feed Direction Note: The smallest supported Universal size is 76.2 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.).