Lexmark M3250 Users Guide PDF - Page 48
Out of Service Erase, Print Configuration, Device Operations
View all Lexmark M3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Understanding the printer menus 48 Menu item Description Print Configuration Font Sharpening 0-150(24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Print Configuration Print Density 1-5 (3*) Adjust the toner density when printing documents. Device Operations Quiet Mode Off* On Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the printer performance. Device Operations Panel Menus Enable* Disable Enable access to the control panel menus. Device Operations Safe Mode Off* On Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On and the duplex motor is nonfunctional, the printer performs one‑sided printing for a two‑sided print job. Device Operations Clear Custom Status Erase user‑defined strings for the Default or Alternate custom messages. Device Operations Clear all remotely‑installed messages Erase messages that were remotely installed. Device Operations Automatically Display Error Screens On* Off Show existing error messages on the display after the printer remains inactive on the home screen for a length of time equal to the Screen Timeout setting. Note: An asterisk (*) next to a value indicates the factory default setting. Out of Service Erase Menu item Out of Service Erase Memory Last Sanitized Hard Disk Last Sanitized Out of Service Erase Sanitize all information on nonvolatile memory Sanitize all information on hard disk Erase all printer and network settings Description Show information on when the printer memory or hard disk was last sanitized. Note: Hard Disk Last Sanitized appears only in printers with a hard disk installed. Clear all settings and applications that are stored in the printer memory or hard disk. Note: Sanitize all information on hard disk appears only in printers with a hard disk installed.