Home » Lexmark Manuals » Multifunction Devices » Lexmark MC3224 » Manual Viewer

Lexmark MC3224 Embedded Web Server Administrator s Guide - Page 34

Configuring security audit log settings

Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Lexmark Confidential until announced Securing printers 34 4 In the Authentication Hash menu, select the hash function of your SNMP server. 5 In the Minimum Authentication Level, select Authentication, Privacy. 6 In the Privacy Algorithm menu, select the strongest setting supported by your network environment. 7 Click Save. Configuring SNMP traps After configuring SNMP settings, you can customize which alerts are sent to the network management system by designating events (SNMP traps) that trigger an alert message. 1 From the Embedded Web Server, click Settings > Network/Ports > SNMP > Set SNMP Traps. 2 In one of the IP Address fields, type the IP address of the network management server or monitoring station. 3 Select the conditions that you want to generate an alert. 4 Click Save. Configuring security audit log settings The security audit log lets administrators monitor security‑related events on a device, including failed user authorization, successful administrator authentication, and Kerberos file uploads to a device. By default, security logs are stored on the device, but may also be transmitted to a network system log (syslog) server for processing or storage. We recommend enabling audit in secure environments. 1 From the Embedded Web Server, click Settings > Security > Security Audit Log. 2 Do one or more of the following: Activate security audit logging Select Enable Audit. Configure transmission to a network syslog server This option lets you use both the remote syslog server and the internal logging. a Select Enable Remote Syslog. b Configure the Remote Syslog settings. • Remote Syslog Server-Type the IP address or host name of the server. • Remote Syslog Port-Type the port number used for the destination server. The default number is 514. • Remote Syslog Method-Select Normal UDP to send log messages and events using a lower‑priority transmission protocol. Otherwise, select Stunnel. • Remote Syslog Facility-Select a facility code for events logged to the destination server. All events sent from the device are tagged with the same code to aid in sorting and filtering by network monitor or intrusion detection software.

Section	Page
Contents	2
Change history	4
Overview	6
Supported printers	6
Supported web browsers	7
Accessing the Embedded Web Server	7
Parts of the Embedded Web Server	7
Understanding helper text	8
Managing printers	9
Checking the status of parts and supplies from the Embedded Web Server	9
Generating reports and logs	9
Configuring supply notifications	10
Managing contacts	10
Adding contacts	10
Adding groups	11
Editing contacts or groups	11
Deleting contacts or groups	11
Scanning	12
Configuring the scan settings	12
Configuring the copy settings	12
Configuring the e-mail settings	13
Configuring the FTP settings	16
Configuring the flash drive settings	18
Creating a shortcut	20
Managing Scan Center destinations	20
Configuring a network destination	20
Configuring an e-mail destination	21
Configuring a fax destination	21
Configuring a remote printer destination	21
Faxing	23
Configuring the fax settings	23
Setting the fax mode	23
Configuring analog fax	23
General Fax Settings	23
Fax Send Settings	23
Fax Receive Settings	25
Fax Cover Page	26
Fax Log Settings	26
Speaker Settings	26
Configuring the fax server	27
General Fax Settings	27
Fax Server E-mail Settings	27
Fax Server Scan Settings	28
Networking	29
Configuring the HTTP/FTP Settings	29
Selecting the active network adapter	29
Connecting to a wireless network	30
Securing printers	31
Securing network connections	31
Configuring TCP/IP port access settings	31
Configuring IP Security settings	31
Configuring 802.1x authentication	32
Setting the restricted server list	33
Managing devices remotely	33
Using HTTPS for printer management	33
Setting up SNMP	33
Configuring SNMP versions 1 or 2c settings	33
Configuring SNMP version 3 settings	33
Configuring SNMP traps	34
Configuring security audit log settings	34
Updating firmware	35
Managing login methods	36
Restricting public access to functions, applications, printer management, and security options	36
Using local accounts	36
Creating local accounts	36
Editing and deleting local accounts	36
Creating local account groups	37
Editing or deleting local account groups	37
Using LDAP or LDAP+GSSAPI	37
Creating an LDAP or LDAP+GSSAPI login method	38
Editing or deleting LDAP or LDAP+GSSAPI login methods	40
Using Kerberos	40
Creating a Kerberos login method	40
Setting the date and time	41
Using Active Directory	42
Creating an Active Directory login method	42
Editing or deleting an Active Directory login method	42
Creating LDAP, LDAP+GSSAPI, or Active Directory groups	44
Editing or deleting LDAP, LDAP+GSSAPI, or Active Directory groups	44
Understanding access controls	45
Managing certificates	47
Configuring printer certificate defaults	47
Creating a printer certificate	47
Installing certificates manually	48
Installing certificates automatically	48
Viewing, downloading, and deleting a certificate	48
Managing other access functions	49
Scheduling access to USB devices	49
Setting login restrictions	49
Configuring confidential printing	49
Enabling solutions LDAP settings	50
Showing secured applications or functions on the home screen	50
Enabling print permission	51
Enabling the security reset jumper	51
Securing data	52
Configuring printer settings	52
Erasing printer memory	53
Erasing printer hard disk memory	54
Configuring printer hard disk encryption	54
Restoring factory default settings	54
Statement of Volatility	54
Troubleshooting	56
Login troubleshooting	56
User is locked out	56
Update the allowed number of login failures and lockout time	56
Reset or replace the smart card	56
User is logged out automatically	56
Increase the Screen Timeout value	56
User cannot access applications or functions	56
Make sure that the user is assigned to a group that has access to the applications and functions	56
KDC and MFP clocks are out of sync	56
Make sure that the date and time settings on the printer are correct	56
Domain controller certificate is not installed	57
Make sure that the correct certificate is installed on the printer	57
KDC is not responding within the required time	57
Make sure that the IP address or host name of the KDC is correct	57
Make sure that the KDC is available in the configuration file	57
Make sure that the server and firewall settings are configured to allow communication between the printer and the KDC server on port 88	57
LDAP troubleshooting	57
LDAP lookups fail	57
Make sure that the server and firewall settings are configured to allow communication between the printer and the LDAP server on port 389 and port 636	57
If reverse DNS lookup is not used in your network, then disable it in the Kerberos settings	57
If the LDAP server requires SSL, then enable SSL for LDAP lookups	57
Narrow the LDAP search base to the lowest possible scope that includes all necessary users	57
Make sure that all LDAP attributes that are being searched for are correct	57
Scanning problems	58
Cannot scan to the selected destination	58
Make sure that the destination is valid	58
If the printer and destination are in different domains, then make sure that the domain information is specified	58
Make sure that the printer is connected to the network	58
Make sure that the user name and password are correct	58
Make sure that the user has permission to save scans to the destination	58
Make sure that a file with the default file name does not exist in the destination	58
Configure the firewall to allow communication with the subnet in which the printer is located	58
Make sure that the printer and destination have the same subnet	58
Make sure that the LDAP settings are configured properly in your printer setup and in the setup dialog	58
Contact your system administrator	58
License error	59
Contact your Lexmark representative	59
An error occurs when opening a secure PDF file	59
Make sure that the PDF version for the device is not set to A-1a	59
Faxing problems	59
Cannot receive fax from one sender	59
Make sure that the sender used the correct fax number	59
Check if the fax has no caller ID and station name	59
Check if the sender fax number is not blocked	59
Generate fax logs and identify the status message	59
Cannot receive fax from all senders	59
Make sure that the printer is configured to receive faxes	59
If using a distinctive ring service, then confirm that the printer is configured properly to pick up the correct ring pattern	60
Reduce the Max Receive speed	60
Check the fax forwarding setting	60
Make sure that no other phone number is competing with the printer	60
Generate fax logs and identify the status message	60
Cannot send fax to one destination	60
Make sure that you entered the correct fax number	60
Reduce the maximum send speed	60
Generate fax logs and identify the status message	61
Cannot send to all fax destinations	61
Make sure that the printer is not configured for Fax Server mode	61
Make sure that the printer is configured to send faxes	61
Check if you are using a PABX telephone system	61
Check if you have entered the proper dialing prefix	61
Reduce the Max Send speed	61
Make sure that you have entered a station ID and station number	61
Generate fax logs and identify the status message	62
Networking problems	62
Printer is not communicating on the network	62
Check the network status	62
Check the printer port access	62
Check the Restricted Server List	62
Make sure that communication is not blocked by a firewall or workplace VPN	62
Notices	63
Edition notice	63
GOVERNMENT END USERS	63
Trademarks	63
GifEncoder	64
ZXing 1.7	64
Apache License Version 2.0, January 2004	64

Match case Limit results 1 per page

In the Authentication Hash menu, select the hash function of your SNMP server.

In the Minimum Authentication Level, select

Authentication, Privacy

In the Privacy Algorithm menu, select the strongest setting supported by your network environment.

Click

Save

Configuring SNMP traps

After configuring SNMP settings, you can customize which alerts are sent to the network management system

by designating events (SNMP traps) that trigger an alert message.

From the Embedded Web Server, click

Settings

Network/Ports

SNMP

Set SNMP Traps

In one of the IP Address fields, type the IP address of the network management server or monitoring station.

Select the conditions that you want to generate an alert.

Click

Save

Configuring security audit log settings

The security audit log lets administrators monitor security

‑

related events on a device, including failed user

authorization, successful administrator authentication, and Kerberos file uploads to a device. By default, security

logs are stored on the device, but may also be transmitted to a network system log (syslog) server for processing

or storage.

We recommend enabling audit in secure environments.

From the Embedded Web Server, click

Settings

Security

Security Audit Log

Do one or more of the following:

Activate security audit logging

Select

Enable Audit

Configure transmission to a network syslog server

This option lets you use both the remote syslog server and the internal logging.

Select

Enable Remote Syslog

Configure the Remote Syslog settings.

•

Remote Syslog Server

—Type the IP address or host name of the server.

•

Remote Syslog Port

—Type the port number used for the destination server. The default number is

514.

•

Remote Syslog Method

—Select

Normal UDP

to send log messages and events using a

lower

‑

priority transmission protocol. Otherwise, select

Stunnel

•

Remote Syslog Facility

—Select a facility code for events logged to the destination server. All events

sent from the device are tagged with the same code to aid in sorting and filtering by network monitor

or intrusion detection software.

Lexmark Confidential until announced

Securing printers