Lexmark MX510 Quick Reference - Page 8
When loading A6
View all Lexmark MX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2 Squeeze the tab on the left width guide, and then move the guides for the paper you are loading. • Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. • Load paper, transparencies, and card stock with the recommended printable side faceup and the top edge entering the printer first. For more information on loading transparencies, see the packaging that the transparencies came in. 4 Load the paper or specialty media. Notes: • Do not force paper or specialty media into the multipurpose feeder. • Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper guides. Overfilling may cause paper jams. 3 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. Note: When loading A6‑size paper, make sure the multipurpose feeder extender rests lightly against the edge of the paper so that the last few sheets of paper remain in place. • Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. 8