Lexmark MX718 User Guide - Page 242

Maintaining the printer 242 Item United States and Canada European Economic Area (EEA+) Rest of Europe, Latin America Middle East, Distribution and Africa (LAD) (RoEMEA) Rest of Asia Australia and Pacific (RoAP) New Zealand (ANZ) Extra high yield 63B1X00 toner cartridge* 63B2X00 63B5X00 63B4X00 63B3X00 63B6X00 * This supply item is supported only in MX718 printer model. For more information on countries located in each region, go to www.lexmark.com/regions. MX717 and MX718 Regular cartridges Item Regular cartridge Worldwide High yield toner cartridge 53B0HA01 Extra high yield toner cartridge 53B0XA02 1 This supply item is supported only in MX717 printer model. 2 This supply item is supported only in MX718 printer model. For more information on countries located in each region, go to www.lexmark.com/regions. Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Lexmark Return Program Regular Imaging unit 520Z 520ZA Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and the imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. • Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser. Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary.