Lexmark MarkNet MarkNet External Print Server Quick Start - Page 4
Setup information - reset
View all Lexmark MarkNet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Setup information Step 1: Connect the hardware Note: The three-port model (shown in the illustration) has two parallel ports and one serial port. The one-port models are parallel only. For information about using the serial port, refer to the online documentation on the drivers CD that shipped with your print server. MarkNet™ External Print Servers support Ethernet or Token-Ring networks. 1 Turn off and unplug your printers. 2 Connect the network and printer cables. If you are connecting only one parallel printer, use port PAR 1 on the print server. 3 Connect the print server power supply. 4 Plug all the power cords into properly grounded electrical outlets. The print server turns on automatically. 5 Turn on the printers. 6 Press and release Menu and Test simultaneously to reset the print server. The Menu and Test buttons are located on top of the print server. 2