Lexmark Multifunction Laser C77x - User's Guide - Page 58
If you are loading a different type of media than was previously loaded in the tray
![]() |
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Printing 5 Place the paper in the tray as shown, print side down. Do not load bent or wrinkled paper. Note: Do not exceed the maximum stack height. Overfilling the tray may cause jams. Maximum stack height indicator 6 Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper. 7 Reinstall the tray. Make sure the tray is pushed completely into the printer. 8 If you are loading a different type of media than was previously loaded in the tray, change the Paper Type setting for that tray on the operator panel. Loading standard trays and optional trays 58
![](/manual_guide/products/lexmark-multifunction-laser-c77x-users-guide-3326383/58.png)
Loading standard trays and optional trays
58
Printing
5
Place the paper in the tray as shown, print side down.
Do not load bent or wrinkled paper.
Note:
Do not exceed the maximum stack height. Overfilling the tray may cause jams.
6
Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper.
7
Reinstall the tray.
Make sure the tray is pushed completely into the printer.
8
If you are loading a different type of media than was previously loaded in the tray, change the Paper Type setting
for that tray on the operator panel.
Maximum stack height indicator