Lexmark Network Printer Device Setup Guide - Page 5
Step 1: Before setting up, Step 2: Connect the print server to the network.
View all Lexmark Network Printer Device manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Step 1: Before setting up Before setting up your print server, make sure the printer has been set up correctly. • Your printer is plugged in. • Your printer is turned off. • The toner or print cartridges are installed. • Paper is loaded. • Your printer is located near an Ethernet network connection. • Your printer is not connected to any other device. For help, see your printer documentation Step 2: Connect the print server to the network. Select the configuration that applies to your current setup. Note: An Ethernet cable is required. It is not included with your print server. You must purchase it separately. 1
1
Step 1: Before setting up
Before setting up your print server, make sure the printer has been set up correctly.
•
Your printer is plugged in.
•
Your printer is turned off.
•
The toner or print cartridges are installed.
•
Paper is loaded.
•
Your printer is located near an Ethernet network connection.
•
Your printer is not connected to any other device.
For help, see your printer documentation
Step 2: Connect the print server to the network.
Select the configuration that applies to your current setup.
Note:
An Ethernet cable is required. It is not included with your print server. You must purchase it separately.