Lexmark Network Printer Device Setup Guide - Page 6
Step 3: Connecting the USB, cable
![]() |
View all Lexmark Network Printer Device manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Once the print server is installed, attach the antenna to the option card. Make sure to tighten the connector until the antenna is attached securely, as a loose connection can result in a poor wireless signal. Then, bend the joint until the antenna is pointing up. Note: Some printer configurations create space restrictions that may require the antenna be attached before installing the option card. Step 3: Connecting the USB cable 1 Replace any panel(s) or hardware that was removed. 2 Close all printer doors. 3 Turn the printer on. Connecting the USB cable 2
![](/manual_guide/products/lexmark-network-printer-device-setup-guide-adec24c/6.png)
2
Connecting the USB cable
Once the print server is installed, attach the antenna to the option card. Make sure to tighten the connector until the
antenna is attached securely, as a loose connection can result in a poor wireless signal. Then, bend the joint until the
antenna is pointing up.
Note:
Some printer configurations create space restrictions that may require the antenna be attached before
installing the option card.
Step 3: Connecting the USB
cable
1
Replace any panel(s) or hardware that was removed.
2
Close all printer doors.
3
Turn the printer on.