Lexmark Optra C710 Service Manual - Page 67
Diagnostic Information, Start
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5016-001 2. Diagnostic Information Start CAUTION: Remove power from the printer before you connect or disconnect any cable, electronic board or assembly, for personal safety and to prevent damage to the printer. Always use the hand grips on the side of the printer and be sure your fingers are not under the printer when you set the printer down. Use the service error codes, user status messages, user error messages, symptom tables, service checks, and diagnostic aids, to determine the corrective action necessary to repair a malfunctioning printer. Service error codes are indicated by a three-digit error code. If a service error code displays, go to the "Service Error Codes" on page 2-2. User status messages provide the user with information on the current status of the printer. "Ready" displays on the first line of the display unless Power Saver is invoked, then Power Saver is displayed. If a user status message displays, go to the "User Status Messages" on page 2-7. User error messages are indicated by a two or three digit error code which provides the user with information explaining a problem with a print cartridge, paper jam, option, port, and so on. If a user error message displays, go to the "User Attendance Messages" on page 2-13. If you have a failing symptom, go to the "Symptom Tables" on page 2-28. Locate your symptom and take the appropriate action. If a service error code appears while you are working on the printer, go to the "Service Error Codes" on page 2-2 and take the appropriate action. Diagnostic Information 2-1