Lexmark Optra Color 1200 Setup Guide - Page 50
ing the system board on If you have other options to install, continue
![]() |
View all Lexmark Optra Color 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Clip Pins 8 Make sure both metal clips on the connector are fastened, and the two pins on each end of the connector are pushed through the holes on the card. Clip 9 Repeat steps 4-8 to install the other memory card or cards. 10 If you have other options to install, continue with "Installing a hard disk" on page 45 or "Installing adapters" on page 48. Otherwise, go to "Reinstalling the system board" on page 52. 44 Install memory and network options
![](/manual_guide/products/lexmark-1200-setup-guide-bbc96c0/50.png)
44
Install memory and network options
8
Make sure both metal clips on the connector are
fastened, and the two pins on each end of the con-
nector are pushed through the holes on the card.
9
Repeat steps 4–8 to install the other memory card
or cards.
10
If you have other options to install, continue with
“Installing a hard disk” on page 45 or “Installing
adapters” on page 48. Otherwise, go to “Reinstall-
ing the system board” on page 52.
Pins
Clip
Clip