Lexmark Optra Color 1200 Setup Guide - Page 52
Installing the disk, back of the system board. Securely tighten
View all Lexmark Optra Color 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the disk Disk bracket You need a Phillips screwdriver to install the disk. 1 Complete the steps in "Removing the system board" on page 38. 2 Locate the disk bracket underneath the system board. 3 Hold the hard disk so the ribbon cable extends upward. 4 Slide the disk all the way into the bracket. 5 Insert the screws provided with the option into the back of the system board. Securely tighten the screws. 46 Install memory and network options
46
Install memory and network options
Installing the disk
You need a Phillips screwdriver to install the disk.
1
Complete the steps in “Removing the system
board” on page 38.
2
Locate the disk bracket underneath the system
board.
3
Hold the hard disk so the ribbon cable extends
upward.
4
Slide the disk all the way into the bracket.
5
Insert the screws provided with the option into the
back of the system board. Securely tighten the
screws.
Disk bracket