Lexmark Optra N model 240 Service Manual - Page 39
Bottom Guide Removal, Repair Information 3-8, Finisher
View all Lexmark Optra N model 240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4040 Finisher Bottom Guide Removal 1. Remove the tray. 2. Remove the 3 screws (1). 3. Remove the 3 screws (2) and pull the bottom guide (3). 4. Remove the cable (2) from the cable guide (1). 5. Disconnect the 2 connectors (3) and remove the bottom guide (4). When you replace the bottom guide be sure it is completely seated in the frame. This will prevent binds that could cause the shutter to give error codes. Repair Information 3-8
Repair Information 3-8
4040 Finisher
Bottom Guide Removal
1. Remove the tray.
2. Remove the 3 screws (1).
3. Remove the 3 screws (2) and pull the bottom guide (3).
4. Remove the cable (2) from the cable guide (1).
5. Disconnect the 2 connectors (3) and remove the bottom guide
(4).
When you replace the bottom guide be sure it is completely seated
in the frame. This will prevent binds that could cause the shutter to
give error codes.