Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 198

Caring for Your Printer Understanding Printer Messages Line 2 Messages The following are messages that appear on the second line of the display. Line 2 messages give information about printer status. Status Message Check Config ID Infrared x LocalTalk x Fax Fax x Maintenance Network x Parallel Parallel x Serial Serial x Meaning The printer configuration identification (ID) is not set or is not valid. Call Lexmark Technical Support. x is 1, 2, or 3 and represents the infrared port attached to connector x. The printer is locked onto the Infrared x host interface. x is 1, 2, or 3 and represents the LocalTalk card attached to connector x. The printer is locked onto the LocalTalk x host interface. The printer is processing a fax via the standard serial port. x is 1, 2, or 3 and represents the fax modem attached to connector x. The printer is locked onto the Fax x host interface. The printer requires replacement of routine maintenance items to maintain top performance, and avoid print quality and paper feed problems. The message displays when the printer maintenance counter determines 250,000 pages have printed. These components are in a maintenance kit available from Lexmark. This message continues to display until the maintenance kit items are installed and your service provider resets the printer. For more information, see "Maintaining Your Printer" on page 247. x is 1, 2, or 3 and represents the network card attached to connector x. The printer is locked onto the Network x host interface. The printer is locked onto the printer standard parallel host interface. x is 1, 2, or 3 and represents the parallel port attached to connector x. The printer is locked onto the optional parallel x host interface. The printer is locked onto the printer standard serial host interface. x is 1, 2, or 3 and represents the serial port attached to connector x. The printer is locked onto the optional serial x host interface. 182 Understanding Printer Messages