Lexmark Optra S 1620 User's Guide (7.1 MB) - Page 335
Removing an Option Card, Place the option card in its original packaging.
View all Lexmark Optra S 1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Installing Options Removing an Option Card WARNING: Electronic components are easily damaged by static electricity. Touch something metal before you touch the card. 1 If necessary, follow the steps under "Accessing the Printer System Board" starting on page 293. 2 Locate the option you want to remove. See page 296. 3 Loosen and remove the two screws over and under the slot. Gently pull the card out of the connector on the system board. Memory and Option Cards 4 Place the option card in its original packaging. If you did not save the packaging, wrap the card in paper and store it in a box. 5 If you need to install a replacement card or another option on the system board: - See "Option Cards" on page 308. - See "Printer Memory Option" on page 299. - See "Flash Memory Option" on page 304. 6 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Memory and Option Cards 319