Lexmark Optra S 1650 User's Guide (7.1 MB) - Page 128
Network Menu Selections Continued
View all Lexmark Optra S 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Using the Operator Panel and Menus Using Your Printer Network Menu Selections (Continued) Menu Item Values and Functions of the Menu Items Network Buffer Job Buffering Auto* 3K to maximum size allowed Your printer has a variable buffer size that can be changed from the operator panel. You can configure the size of the input port buffers to meet your system needs. The maximum size available for modification depends on the amount of memory in your printer, the size of the other link buffers, and if the Resource Save setting is On or Off. To maximize the range for the Network buffer size for any of the three network buffers, you can disable or reduce the size of the parallel, serial, Infrared, Fax, and LocalTalk buffers. The Auto setting indicates the printer selects the buffer size based on the total memory available. Changing the Network Buffer setting automatically resets the printer. Off* On The Job Buffering menu item does not display if the formatted hard disk is defective, is Read/Write or Write protected, or if the Job Buffer Size is set to Disabled. 61 Defective Disk displays during printer power on. See 61 Defective Disk on page 189 for more information. Also, see Job Buffer Size on page 93. Job buffering lets you delay processing of a print job. The job is temporarily stored on an optional hard disk before being printed. This usually frees the host computer during the actual printing of a print job. If Job Buffering is set On, print jobs are buffered to the hard disk. If Job Buffering is set Off, the print jobs are not buffered. NETWORK x SETUP Changing the Job Buffering setting automatically resets the printer. Values for this menu item are supplied by the network card. Access the menu to see the values. x represents the connector in which the card is attached. Refer to the documentation that came with your network option. * Factory Default 112 Using the Operator Panel and Menus