Lexmark Optra S 1650 User's Guide (7.1 MB) - Page 318
See Closing the Printer System Board on
View all Lexmark Optra S 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Memory and Option Cards Installing Options 4 Make sure both metal clips on the connector are fastened and the two pins on the connector are pushed through the holes on the memory option. 5 If you are installing a second memory option, repeat steps 1 to 4, installing it in memory connector 2. 6 If you need to install another option on the system board: - See "Flash Memory Option" on page 304. - See "Option Cards" on page 308. 7 See "Closing the Printer System Board" on page 297 to reattach the shield and side door. Note: To verify that the option is installed properly, see "Verifying the Installation of Options" on page 325. 302 Memory and Option Cards
Memory and Option Cards
302
Memory and Option Cards
Installing Options
4
Make sure both metal clips on the connector are fastened
and the two pins on the connector are pushed through the
holes on the memory option.
5
If you are installing a second memory option, repeat steps
1 to 4, installing it in memory connector 2.
6
If you need to install another option on the system board:
-
See “Flash Memory Option” on page 304.
-
See “Option Cards” on page 308.
7
See “Closing the Printer System Board” on page 297 to
reattach the shield and side door.
Note:
To verify that the option is installed properly, see “Verifying
the Installation of Options” on page 325.