Lexmark Optra T616 Card Stock & Label Guide - Page 51
Overview of card stock support, Media specifications, Paper source, Card stock, grain long/grain short
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Overview of card stock support Paper source Standard and optional 550-sheet trays Multipurpose feeder Index Bristol grain long grain short 163 g/m2 199 g/m2 163 g/m2 199 g/m2 Card stock (grain long/grain short) Tag grain long grain short 163 g/m2 203 g/m2 163 g/m2 203 g/m2 Cover grain long grain short 176 g/m2 216 g/m2 176 g/m2 216 g/m2 Overview of label support Labels Paper source Paper Dual-web paper Polyester Vinyl1, 2 Standard and optional 550-sheet trays 180 g/m2 180 g/m2 220 g/m2 300 g/m2 Multipurpose feeder 199 g/m2 199 g/m2 220 g/m2 260 g/m2 1 Vinyl labels are supported only when the printing environment and media are 20-32.2°C (68-90°F). 2 The skew performance of heavy vinyl labels may be enhanced by feeding from an optional 500-sheet drawer if placement of the image is critical. For paper and transparency specifications, see the printer publications CD. Media specifications Labels Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 50-300* Sheffield * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield such as coated paper, polyester, vinyl, or other synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service representative for ordering information. When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. For vinyl and other heavy labels, set Labels Weight (under the Paper Weight menu) to Heavy, and set Labels Texture (under the Paper Texture menu) to Smooth. • Do not load labels together with paper or transparencies in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Print on sheets with more number of labels to improve registration. Printer specifications 51