Lexmark Optra T616 Card Stock & Label Guide - Page 58
Lexmark C935
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • From the printer control panel, set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark C935 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Labels Tray 1 Not applicable Card stock 105 g/m2 Trays 2 and 3 Not applicable 220 g/m2 Multipurpose feeder 220 g/m2 220 g/m2 Media specifications Labels Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2 Thickness: 0.13-0.20 mm (0.005-0.008 in.) Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Printer specifications 58